Setup Step 5: Program the Remote Transmitter

Note: The Transmitter is factory set to mode 1. The mode of the Remote Transmitter can be changed to fit your type or style of training.

To change the mode:

1. Referring to the table in your manual for your model, adjust the Intensity Dial to the mode you want to use.
2. For modes 1 – 6, in the Toggle Switch up position, select the desired mode on the Intensity Dial. Or for modes 1 – 6, in the Toggle Switch down position, select the desired mode on the Intensity Dial. For example, if mode 5 is desired, in either the Toggle Switch up or Toggle Switch down position, set the Intensity Dial to level 5.
3. Turn the Remote Transmitter over.
4. With a pen, depress and release the mode button. When the mode button is pressed, the Transmitter Indicator Light will be solid in color. When it is released, it will flash the mode selected.

For example, if Mode 2 is desired, adjust the Intensity Dial to Level 2. Once the Mode button has been depressed, the Transmitter Indicator Light will be solid, and once the Mode button is released, the Transmitter Indicator Light will flash 2 times.

Note: Continuous Stimulation will transmit for no more than 8 continuous seconds no matter how long the button is pressed. To reactivate, release and repress the button.

Products related to this Support Topic: