Support Topic

How do I test the unit to see if it is operational?

To avoid feeling the Stimulation yourself, never touch the two Contact Points simultaneously.

  1. Turn the Mode Switch to TEST.
  2. Hold the unit by the collar with the Indicator Light facing towards you and fit the Test Light Tool to the Contact Points. The unit should be within 15 - 25 cms of your mouth.
  3. Say “Test” loudly into the Sound Activated Sensor.
  4. The Indicator Light and Test Light Tool will flash three times to show that it is functioning properly.
  5. If the Indicator Light and/or Test Light Tool do not flash, ensure that the battery is properly installed, and/or replace the battery.  If the Indicator Light and/or Test Light Tool still do not flash, contact us.
  6. Return the Mode Switch to Low before replacing the NoBark™ 18 on your dog.

Note: The TEST Mode is not intended for normal operation. If the NoBark™ 18 Bark Control is left in TEST Mode while on your dog, it can cause false stimulation and may reduce battery life.

Products related to this Support Topic:

_en-ca