Troubleshooting
- The Power Light is on, the Loop Indicator Light is off, and the Fence Transmitter loop alarm is sounding.
- Why are my Power and Loop Indicator Lights off?
- The fuses blow when they are replaced.
- I have a break in the Boundary Wire.
- The collar has to be held on top of the Boundary Wire to activate, or it does not activate at the Boundary at all.
- The Collar Receiver is beeping, but the dog is not responding to the stimulation.
- How do I drain the battery memory?
- Why is my Fence Transmitter making a loud noise?
- How do I check the fuses in my transmitter?
- I need to replace the battery.
Setup
- Installation Step 1: Locate and Place the Fence Transmitter
- Installation Step 2: Lay Out the System
- Installation Step 3: Position the Boundary Wire
- Installation Step 4: Connect the Wires to the Fence Transmitter
- Installation Step 5: Prepare the Collar Receiver
- Installation Step 6: Set the Boundary Width and Test the Collar Receiver
- Installation Step 7: Install the Boundary Wire
- Installation Step 8: Place the Boundary Flags
- Installation Step 9: Fit the Collar Receiver